Custom Cut Phantom Body
SMS breeding phantom bodies and legs come with a 15 year warranty (warranty does not include cover). It is built from heavy duty steel, yet is still easily adjustable. Our cutout on the side provides for easier positioning of the AV. It helps keep the stallion positioned behind the breeding phantom rather than trying to come around the side to reach the AV. Without the cutout stallions have a tendency to twist their back to get to the AV on the side of the AV. Once they are around the side, some stallions just continue up the side until they fall off the front. If they don’t travel up the side, then they are still breeding in an uncomfortable and unbalanced position. By starting him behind the breeding phantom in a comfortable position he has no reason to travel up the side. There is also the added touch of another comfort cut at the top of the back end. It was put there purely for the comfort of the stallion. After all he is the main customer of the breeding phantom.
Phantom Legs
The SMS Breeding Phantom is built with two heavy duty steel legs to withstand the most aggressive stallions. During training stallions have been known to climb completely over a breeding phantom with the entire weight of their body on the breeding phantom all at once. Have piece of mind knowing your breeding phantom has two sturdy legs under it and two heavy duty, SOLID connecting points to the breeding phantom body. Our legs don’t have any fancy gears or hydraulics to adjust them. Our legs are the same size square tubing and hitch pins used to tow your trailer. This makes our phantoms less expensive to make, yet you can still easily change their height and angle. Our legs are positioned toward the back to properly distribute his weight over BOTH legs. When the legs are toward the front of the phantom one of the legs ends up in the middle of the phantom. As the stallions is mounted on one end, the center leg works like a fulcrum (imagine a teeter totter – what happens when weight is applied at one end – the other end goes up) That puts a lot of lift on that front leg and I’ve seen them pop right out of the ground, cement and all. You also don’t want the legs so far back that they are in the way of the stallion’s hind feet while he is on the phantom.
Phantom Covers
Phantom Padding
We collect and train stallions for a living and have used many different breeding mounts, and I can very proudly say “our breeding phantoms are the best I’ve used”.
By holding the Artificial Vagina yourself rather than the AV being built into the phantom
you gain the following benefits:
Less semen spillage:
You have control of the AV so the semen doesn’t drain out as stallion withdraws. You can also slowly tilt the AV so the semen gets to the collection bottle as soon as possible. The less time in the AV the better. Ideally the stallion should ejaculate into the other end of the AV, not inside the AV itself.
Less semen damage:
Quicker release of water so semen doesn’t get too hot.
The quicker you can get the semen to the lab the better. With the built in AV you have to have the stallion dismount BEFORE you remove AV. By using our phantom the AV is already with you. Rushing the stallion to dismount (so you can get to the AV inside the phantom) is not a reward for a job well done.
Safer for stallion:
No risk of “missing” and stallion getting hurt on AV opening. If you are using a handheld AV you can move with him.